100W MONO/STEREO AMPLIFIER MODULE

Order Code: AMP100

Which amplifier may be called "universal" ? Aren't they all - in a way ? That's how it is ! But...
Which amplifier lets you choose from three different input levels, mono or stereo ?
Which amplifier is not only protected against overloading, but against shortcircuiting and against reverse polarisation of power supply as well ?
Which amplifier is also thermally protected and has a speaker plop protection on top ?
Which amplifier has its heatsink designed into an ultramodern and compact casing ?
Which amplification modules are so compact they can be built into the speaker box itself, next to the speakers, or in the boot of a car, so that the damping remains optimal, for best bass performance ?

Features

• exists also in kit version: K4004
  

  Order Code: K4004

  

  Universal, robust and compact are the words to describe this amplifier.
  Universal : A stereo or a mono amplifier. Three input sensitivities are selectable.
  Robust : Overload and short-circuit protection, protection against incorrect power supply polarity and thermally protected too (option for K4005). Speaker transient suppression.
  Compact :
  The PCB housing also functions as the heat sink. The amplifier may be used as a built-in module, or as a freestanding unit using one of our enclosures.

  Specifications

  • rms output power: 2 x 50W / 4ohm ; 2 x 40W / 8ohm
  • rms mono-bridged power: 100W / 8ohm
  • total music output: 200W
  • harmonic distortion: 0.01% at 1kHz
  • signal-to-noise ratio: 102dB (A weighted)
  • stereo channel separation: 85dB
  • damping factor (at 100Hz): > 1000
  • input impedance: 22Kohm
  • input sensitivity: 300mV, 550mV or 1V switchable
  • thermal protection: max. 1h
  • short-circuit and overload protection: max. 10 sec.
  • power supply: + 28VDC and - 28VDC max.
  • consumption (2 x 4ohm or mono-bridge 8ohm): 4A max.
  • consumption (2 x 8ohm): 2.5A max.
  • dimensions: 210 x 85 x 64mm (8.3" x 3.4" x 2.5")

  Files

  • infosheet_k4004_mono.pdf
  • infosheet_k4004_stereo.pdf

Specifications

• power output: 2 x 50Wrms / 4ohm or 2 x 40Wrms / 8ohm
• power output (bridged / mono): 100Wrms / 8ohm
• total music output: 200W
• harmonic distortion: 0.01% (1kHz)
• signal-to-noise ratio: 102dB (A-weighted)
• channel separation: 85dB
• damping factor: >1000 ! (at 100Hz)
• input sensitivity: 300mV, 550mV or 1V (switchable)
• supply voltage: + and -28Vdc / 4A max. (coming from APS100)
• dimensions: 210 x 64 x 85mm (8.3" x 2.5" x 3.5")

Stock Info

• Inner carton:
• Outer Carton: 1
• EAN Barcode:
• Packaging: Unknown